• date_rangePosted On :   Aug 03' 2017
  • location_cityCity :   Dubai
  • languageCountry :   UAE
  • content_pasteEnquiry No. :   S-142422
  • library_booksCatalog :    Not Available

Iodized food common salt is produced in accordance with DSTU 3583-97(GOST 13830-97), GOST Р 51574-2000 and it is used as prevention of iodine deficiency disorders.
The quality of iodized salt is regulated by DSTU 3583-97(GOST 13830-97), and GOST Р 51574 – 2000, in accordance with it the content of iodine should be equal to 40±15•10 – 4 %, or 67,0±25,0 g/t expressed as potassium iodate. The content of moisture in the product should not exceed 1.00%.

  • Contacts Details
  • person :
    A.V.E. STAR
  • business :
    Company A.V.E. STAR
  • home :
    Jumeirah Lake Towers,Cluster F, HDS Tower, office 2810
  • location_city :
  • location_on :
  • language :
  • call :
Beef jerky oven(Electric)---biscuit processing line

date_rangeOct 14' 2017 /  China

1.Electric Type This tunnel oven is composed of oven tunnel, mesh belt , belt driving system, chimney, electric heating pipes and control cabinet. The heater adopts infrared heating to make the biscuit baking equally. Frequency inverts control cabinet makes more accurate temperature controlling and wider temperate regulate range The oven is separate to several individual heating zones as per different formulas. Each Zone has can be regulated individually.

Beef Jerky Oven(Gas)---biscuit processing line

date_rangeOct 14' 2017 /  China

Gas Type 1)The machine is heated with gas(LPG or natural  gas).Rapid heating up and energy saving. 2)The oven is grouped into heat control zones. The top and bottom heat are independently adjustable and preset. The measured temperature and preset temperature will be displayed in digital form. 3)To allow independent movement of the chamber to relieve stresses when expanding or contracting. 4)High-quality thermal insulating material is used to get good insulation and efficient fuel usage.

Smashing machine---wafer biscuit processing line

date_rangeSep 28' 2017 /  China

In the wafer line, there are some trimming and wastage from the cutting process that needs to be reused in order to minimize the overall wastage of wafer baking system that is about 2%. This equipment is used to grind the discarded wafer in to a reusable form. The ground material can be used as additive cream depending on the requirement. The smashing or grinding machine is constructed out of SUS201 Stainless Steel material to maintain hygiene of the reusable products.

Automatic wafer biscuit equipment-Wafer Cooling Tower

date_rangeSep 09' 2017 /  China

Cooling the cream sandwich to make it strong enough for cutting and packing,cooling the wafer to ensure a clean cut. The capacity of the wafer cooler depends on the performance of the equipment and the cooling time required for the product. The cooling time can be set between 15 and 25 minutes depending on the product. The room temperature is adjustable between 13-15ºC and the wafer is placed on the carrier of the conveyor and is cooled during passing through the cooling tower.